dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 22

COMPACT 3.0
EN
HOW TO CUT EPDM GASKET TO AVOID WATER
!
FILTRATION INTO THE CABIN
A- Glue gasket, keeping 100 mm of
protection paper at each side.
B- Remove the two pieces of paper.
C- Glue by pressing both ends.
B
Gasket
5 OUTSIDE CABIN:
Position Compact in sun hatch hole.
Caution! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked by the EPDM seal.
Gasket
Remove
A
Gasket
100 mm Approx. (protection paper)
C
Gasket
22
Air conditioning for vehicles
15 mm
Gasket
Cabin roof
Sun hatch
Gasket
5