dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 27

COMPACT 3.0
2
1- Connect the upper power supply cable to the back of equipment and lead it through the back of the cab
whilst sticking down the plastic clips and securing it with flanges.
2- Connect the lower power supply cable to the Box of fuses + and in the center of masses- , As it is indicated
,by leading it through the original cable route, secured with flanges, to the back of the cab, to connect it with
the upper power supply cable. WHEN CONNECTING THE CABLES LEAVE A SUFFICIENT DISTANCE
TO PREVENT THEM BREAKING DUE TO MOVEMENTS OF THE CAB!
IMPORTANT: Due to the equipment's complex electronic regulation system, the socket must be made
directly on the vehicle's battery.
IMPORTANT: For start up please see the User's Manual.
3
Detailed instructions
on power wiring assembly
+
2
3
-
2
27
Wiring for
power
supply
2
3- Place danger stickers on
the cable join and on the cab
elevation device.
EN
®
1