General Operation; Operating Temperature - Oregon ST275-GSL Manual De Instrucciones

GENERAL OPERATION

CAUTION: TO REDUCE THE RISK OF
INJURY, ALWAYS WEAR PROPER EYE AND
EAR PROTECTION, LONG PANTS, AND
FOOT PROTECTION
IMPORTANT: USE CARE AROUND
STRUCTURES, TREES, AND BUSHES TO
AVOID DAMAGING PAINT OR BARK.

OPERATING TEMPERATURE

This trimmer/edger is designed to operate
within a temperature range of 0°C to 40°C
(32°F to 104°F)
IMPORTANT: THE TRIMMER/EDGER
IS EQUIPPED WITH A TEMPERATURE
SENSOR THAT STOPS THE MOTOR
TO PREVENT THERMAL OVERLOAD
DAMAGE. IF THE TRIMMER/EDGER
STOPS WORKING SUDDENLY, IT
MIGHT BE TOO HOT TO CONTINUE
RUNNING. ALLOW THE TOOL TO COOL
BEFORE CONTINUED OPERATION.
SEE "TROUBLESHOOTING" FOR MORE
INFORMATION.
GRIP
The front handle on the trimmer/edger handle
is adjustable You can move the handle
forward or backward along the shaft until
it is in a comfortable position for trimming,
clearing, or edging
Oregon® Trimmer/Edger Model ST275-GSL
ST275_Operating_Manual_EU.indd 21
SAFETY RULES
Loosen the adjustment knob until the front
handle slides along the shaft, move the
handle to a comfortable position, and then
tighten the adjustment knob (Fig 10)
FIG 10
When using the trimmer/edger, grip both the
front and rear handles firmly
FOOTING
Stand or walk with both feet on solid ground
Do not overreach
STOPPING THE TRIMMER/EDGER
Release the throttle trigger to stop the
trimmer/edger
STARTING THE TRIMMER/EDGER
Grasp the front and rear handles firmly
Squeeze the trigger lock-out (1), then squeeze
the throttle trigger (2) until the trimmer head
moves at the desired speed (Fig 11)
FIG 11
(1) TRIGGER LOCK-OUT
(2) THROTTLE TRIGGER
17/06/16 9:44 AM
21