Technical Data; Before Putting The Equipment Into Operation - Dexter 350OS2.5 Manual De Instrucciones

4.TECHNICAL DATA

NOTE:
- The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another;
-
The declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING:
- The vibration emission during actual use of the power tool can di er from the
declared total value depending on the ways in which the tool is used;
- Identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched o and when it is running idle in
addition to the trigger time). Depending on the actual use of the product the
vibration values can di er from the declared total! Adopt proper measures to protect
yourself against vibration exposures! Take the whole work process including times
the product is running under no load or switched o into consideration! Proper
measures include among others regular maintenance and care of the product and
application tools, keeping hands warm, periodical breaks and proper planning of
work processes!

5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION

WARNING: The device should be disconnected from the mains before
putting into operation.
Mounting/changing the sandpaper
Always ensure that the machine is switched o and plug is removed from the power point
before making any adjustment.
1. Select the required grade of sanding paper.
2. Remove any dust or debris from the hook and loop of the base.
3. To attach hook & loop type sanding paper simply align the holes in the sanding paper
with the holes in the sanding base and press rmly into place.
4. To remove the sanding paper, peel it away from the base.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
173