Safety Rules - KPS -PA30 Manual De Funcionamiento

1. INTRODUCTION
This meter has been designed according to IEC-61010 concerning electronic
measuring instruments with an overvoltage category CAT.III 600V and pollu-
tion 2.
Follow all safety and operating instructions to ensure safe use of the meter.
With proper use and care, this digital multimeter will give you years of satisfac-
tory service.

1.1 Safety rules

When using the meter, the user must observe all normal safety rules concern-
ing:
• General protection against electric shock.
• Protection of the meter against misuse.
When the meter is delivered, check whether it has been damaged in transit.
After being stored and delivered under harsh conditions, the meter should be
checked and confirmed whether any damages have been incurred.
Test leads must be kept in good condition. Before using check whether the
insulation on test leads has been damaged and any wire has been exposed
Use the test leads supplied to ensure operation safety. If required, they must
be replaced with test leads of the same model or class.Description
2.1 Digital clamp meter description
(1) Current Clamp
(2) Clamp Lighting Bulb
(3) Panel
(4) Trigger
(5) Function Switch Button (FUNC)
(6) Manual Button (RANGE)
(7) Bouton manuel (RANGE)
(8) Liquid Crystal Display (LCD)
(9) COM Jack
(10) Input Jack
(11) Hz/Duty Switch Button (Hz/%)
KPS-PA30 • Digital clamp meter
6