Replacing Spring Tines; Storing The Machine; Maintenance And Care - Stihl MF-MM Manual De Instrucciones

English

Replacing Spring Tines

Replace individual spring tines if they
are severely damaged or broken.
Remove the dethatcher – see
N
"Mounting the MultiTool".
1 1
3
Loosen the screws (1) on the
N
dethatcher.
Remove the flange (2).
N
Spring tines and washers are fitted
alternately on the tubes.
Pull off the spring tines (3) and
N
washers.
Replace damaged spring tines.
N
Fit spring tines and washers on the
N
tubes until they are full.
Fit the flange (2).
N
Tighten down the screws (1) firmly.
N
Mount the dethatcher – see
N
"Mounting the MultiTool".
14

Storing the Machine

For periods of 3 months or longer
Remove, clean and inspect the
N
dethatcher with deflector extensions
and mud flap.
Store the machine in a dry, high or
N
locked location – out of the reach of
children and other unauthorized
persons.
2

Maintenance and Care

The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
Retighten if necessary
N
Sweeping attachments and deflectors
Visual inspection, check tightness
N
before starting work and after every
refueling stop
Replace if damaged
N
Safety labels
Replace illegible safety labels
N
MF-MM