Promax MO-180 Manual De Usuario página 107

USER'S MANUAL MO-180
This function, as well as the recall option explained hereafter, automatically
increments the memory number, to allow to easily store and recall the contents of
consecutive memories.
Load from Memory
This is the counterpart function of the previous one. Selecting the desired
memory number, a complete equipment configuration can be loaded.
Channel Plan
Use this function to choose among the channel plans included in the MO-180.
Currently, the available channel plans (an ordered list of channel frequencies) have
been translated from the standard analogue channel plans. A complete list of all
channel plans has been included at the end of this document (see Appendix A).
The selections displayed using the rotary encoder are:
CCIR (Main west European standard)
STD L (French standard)
OIRT (East European standard)
UHF (Only the UHF part from CCIR, for faster selection)
IF Mode
By using this function, the user can select generating a COFDM signal or a
single tone. A single tone can be useful for accurate alignment or testing of external
components. The available options are:
COFDM Generate a COFDM DVB-T/H signal.
TONE MAX Generate a single tone at the maximum level available from the
MO-180.
TONE RMS Generate a single tone at an RMS level equal to the RMS level of
the modulated COFDM signal.
IP Address
Specifies the 4-byte IP address associated to the MO-180. Default value is
192.168.29.5
IP Mask
Specifies the 4-byte mask used by the subnet the MO-180 belongs to. Default is
255.255.255.0
04/2008 Page 37