Promax MO-180 Manual De Usuario página 151

USER'S MANUAL. MO-180
Name Message
*IPGddd.ddd.ddd.ddd<
cr>
IPG
*?LPG<cr>
*MXD<cr>
MXD
*?MXD<cr>
NNI
*?HTI<cr>
HTI
*NOId<cr>
NOI
*?NOI<cr>
*CNRddd<cr>
CNR
*?CNR<cr>
*SIGd<cr>
SIG
*?SIG<cr>
*ECOd<cr>
ECO
*?ECO<cr>
*EAMdaaaa<cr>
EAM
*?EAMd<cr>
Page 81
Answer Description and Format
Sets the IP gateway address
'ddd' decimal digit
value between 000 and 255
Asks for the current IP gateway
*IPGddd.ddd.dd
d.ddd<cr> address
'ddd' as before
*MXDddddddd< Asks for maximum delay value
cr> indicated in the MIP packet
value in 100ns units
'ddddddd' decimal digits
*MXDddddd<cr> Asks for the current NIT Network
Identifier
value between 0 and 65535
*MXDddddd<cr> Asks for the current HP Transport
Stream Identifier
'ddddd' decimal digits
value between 0 and 65535
Sets the noise generator ON/OFF
'd' decimal digit
0: OFF. 1: ON
*NOId<cr> Asks for the noise generator state
'd' as before
Sets the C/N value (in dB x 10)
'ddd' decimal digit
value between 030 and 400 (3.0dB
to 40.0dB)
Asks for the current C/N value
*CNRddd<cr>
'ddd' as before
Sets the signal generator ON/OFF
'd' decimal digit
0: ON. 1: OFF
*SIGd<cr> Asks for the signal generator state
'd' as before
Sets the echoes generator ON/OFF
'd' decimal digit
0: OFF. 1: ON
*ECOd<cr> Asks for the echoes generator state
'd' as before
Sets the amplitude of the echo
'd', 'aaaa' decimal digits
d: selects the echo, value between 0
and 5
a: amplitude value in dBc x 10
*EAMaaaa<cr> Asks for the amplitude of the echo
'd' and 'a' as before
04/2008