Promax MO-180 Manual De Usuario página 149

USER'S MANUAL. MO-180
Name Message
*DISd<cr>
DIS
*?DIS<cr>
*MPRd<cr>
MPR
*?MPR<cr>
*MREd<cr>
MRE
*?MRE<cr>
*MTSd<cr>
MTS
*?MTS<cr>
*MSSd<cr>
MSS
*?MSS<cr>
*?MPL<cr>
MPL
*MIIdddd<cr>
MII
*?MII<cr>
*MFIdddd<cr>
MFI
*?MFI<cr>
*MCBddddddd<cr>
MCB
*?MCB<cr>
Page 79
Answer Description and Format
Disable the RF output.
'd' decimal digit
0:ENABLE RF, 1:DISABLE RF
*DISd<cr> Asks for the current RF disable
state.
'd' as before.
PRBS of 15 or 23 bits
'd' decimal digit
0:15 bits PRBS 1:23 bits PRBS
*MPRd<cr> Asks for the current PRBS length
with 'd' as before
PCR restamping (master mode)
ON/OFF.
'd' decimal digit
0: ON 1: OFF
*MREd<cr> Asks for the current restamping
state. 'd' as before
TS lock mode MASTER or SLAVE
'd' decimal digit
0:SLAVE 1:MASTER
*MTSd<cr> Asks for the current TS lock mode.
'd' as before
Active TS in SLAVE mode
'd' decimal digit
0:HP 1:LP
*MSSd<cr> Asks for the Active TS in SLAVE
mode. 'd' as before
*MPLhhh/lll <cr> Asks for the TS packet length
or detected
*MPLhhh <cr> 'hhh' & 'lll' ASCII text
hhh,lll: 188 or 204 bytes for HP/LP
TS (LP in hierarchical mode only)
Initial carrier index for the blank
carriers test mode.
'dddd' decimal digits
(0000 to 6816 @ 8k, 1704 @ 2k)
*MIIdddd<cr> Asks for the initial carrier index
value. 'dddd' as before
Final carrier index for the blank
carriers test mode.
'dddd' decimal digits
(0000 a 6816 @ 8k, 1704 @ 2k)
*MFIdddd<cr> Asks for the final carrier index value.
'dddd' as before
CBER value generated in test mode.
'ddddddd' decimal digits
ddddddd = CBER x 1E7
Asks for the current CBER value.
*MCBddddddd<
cr> 'ddddddd' as before
04/2008