Promax MO-180 Manual De Usuario página 123

USER'S MANUAL MO-180
Bits
Y
4
Y
3
Y
2
Y
1
Y
0
04/2008
Active
1pps error count.
In SFN operation this bit is asserted when the
number of 10 MHz clock periods between two
1 consecutive active edges of the 1pps signal
differs from 10
ACTION: Check whether the 1pps and 10
MHz signals are synced.
LP MIP CRC error.
When a MIP packet is found in the LP TS this
bit indicates whether a transmission error has
been flagged by the 32-bit CRC decoder
1 implemented in the modulator. In normal
operation there should be no errors in the MIP
packet and, therefore, this bit should be 0.
ACTION: Ensure that the MIP packet has no
transmission errors.
HP MIP CRC error.
Same as right above but for the HP transport
1
stream.
ACTION: See above.
LP TS MIP priority mismatch.
When using the MIP packet to configure the
modulator a discrepancy might exist between
the priority of the transport stream (LP) as
1 signalled by the MIP packet and the priority
we have selected using the menu entry
MODULATOR: LP TS Input.
ACTION: Ensure that the selected LP TS is
the actual LP TS.
HP TS MIP priority mismatch
Same as right above but for the HP transport
1
stream
ACTION: See above
Description
7
Page 53