Operating And Display Elements - Dräger REGARD 2400 Instrucciones De Uso

Operating and display elements

5 Operating and display elements
Fig. 1
18
Power
F1
1
F1
F2
Reset
LED Power (green)
LED Horn (red)
LED Error (yellow)
LED A to D (red)
LED x10 (green)
3-pin connection
1. Press F2 key → Stops the display from scrolling
The following configuration applies to all measuring channels:
One relay each for general alarm and horn

One key to reset the horn and the alarm

An alarm buffer is integrated

LEDs to display the current status

The REGARD 2400/2410 has a scrolling display. The REGARD 2400/2410 is configured with
a PC or laptop via the RS232 interface.
38
Reset
Channel A B C D
F2
REGARD 2410
Set Inhibit Mode (see "Menu" on page 49)
Retain current channel,
Review measuring ranges/alarm thresholds (see "Configuration
information menu" on page 51)
Reset horn and alarm, exit Inhibit Mode
Power supply available
Horn
Faults
Alarm
Display of the measured value x10
RS232 interface
x10 Horn Error
A2
A1
Concentration
A
D
Dräger REGARD 2400/2410
35
B C
17
00233025_01.eps