Com Ports; Program Transfer To The Regard 2400/2410; Special Function; Online Monitor - Dräger REGARD 2400 Instrucciones De Uso

12.4.2 Logger data quantity
Fig. 19
The quantity of data to be stored is selected here.
12.5

COM ports

In the menu File – COM Port the communication settings between the PC and the controller
are defined, see "Configuration information menu" on page 51.
12.6

Program transfer to the REGARD 2400/2410

To send a configuration to the REGARD 2400/2410, the password "1875" must be entered.
In the information window it is pointed out that the relay settings may change and an alarm can
be triggered. By loading a new configuration, the datalogger can be reset.
12.7

Special function

In the menu Function – Special Function special functions are selected. After entry of the
password "1875" inhibit, average value and relay test can be activated.
12.8

Online monitor

In the menu Function – Monitor current measured values and alarms of the REGARD 2400/
2410 are displayed. The green LED indicates normal operation. The red LED indicates an event
(alarm, fault).
Dräger REGARD 2400/2410
Configuration software
02233025_en.eps
59