Shindaiwa EB8510 Manual Del Propietário página 14

Ocultar thumbs Ver también para EB8510:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting Guide (continued)
What To Check
Is the engine overheating?
Engine is rough at all speeds.
May also have black smoke and/
or unburned fuel at the exhaust.
Engine is knocking.
14
LOW POWER OUTPUT
Possible Cause
Operator is overworking the unit.
Carburetor mixture is too lean.
Improper fuel ratio.
Fallen leaves or debris on intake cover.
Fan, fan cover, cylinder fins dirty or damaged.
Carbon deposits on the piston or in the muffler.
Clogged air cleaner element.
Loose or damaged spark plug.
Air leakage or clogged fuel line.
Water in the fuel.
Piston seizure.
Faulty carburetor and/or diaphragm.
Overheating condition.
Improper fuel.
Carbon deposits in the combustion chamber.
Remedy
Use a lower throttle setting.
Consult with an authorized servicing dealer.
Refill with fresh, clean unleaded gasoline with a pump
octane of 87 or higher mixed with a premium 2-cycle
air cooled mixing oil or equivalent at a 50:1 gasoline/
oil ratio.
Clean the intake cover.
Clean, repair or replace as necessary.
Consult with an authorized servicing dealer.
Service the air cleaner element.
Tighten or replace the spark plug. (See page 11).
Repair or replace filter and/or fuel line.
Replace the fuel. See page 7.
Consult with an authorized servicing dealer.
See above.
Check fuel octane rating; check for presence of
alcohol in the fuel (page 7). Refuel as necessary.
Consult with an authorized servicing dealer.

Publicidad

Tabla de contenido
loading

Tabla de contenido