Unit Description; Specifications - Shindaiwa EB8510 Manual Del Propietário

Ocultar thumbs Ver también para EB8510:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Unit Description

Volute
Case
Air Cleaner
Cover
WARNING!
Metal surfaces of crankcase
may be hot! Always wear gloves when
handling this unit.
Figure 3

Specifications

Model .................................................................................EB8510EC2
Dry Weight (without Blower Tubes)...................11.1 kg (24.47 lb.)
Dimensions (LxWxH) ........................................475 x 355 x 495 mm
Engine Type................................4 cycle air-cooled gasoline engine,
Bore & Stroke.................................51 x 39 mm (2.01 x 1.54 inches)
Displacement.................................................79.7cc (4.86 cu. inches)
Max Output/min
...............................3.21 kW/4.3 hp @ 7,500 RPM
-1
Fuel/Oil Ratio.....................................50:1 with Shindaiwa Premium
Carburetor.............................Walbro rotary-type with primer pump
Ignition................................All transistor electronic ignition system
Spark Plug.....................................................................NGK CMR5H
Specifications are subject to change without notice.
Prior to Assembly
Using Figure 3 as a guide, familiarize your-
self with the blower and its components.
Understanding the unit helps ensure top
performance, longer service life, and safer
operation.
Before assembling the blower, make sure
you have all required components.
n Power unit and blower assembly.
n Flexible tube, swivel tube, 2 nozzles
and straight tube.
Spark Plug
Engine
Cover
Starter
Handle
Exhaust
Fuel Tank
Fuel Filler
Cap
(18.7 x 14.0 x 19.5 in.)
vertical-cylinder
2-cycle mixing oil
n Handgrip.
n Two tube clamps (102 and 89mm).
n This Owner's/Operator's Manual and a
tool kit containing a tool bag, 4 mm hex
wrench and a combination spark plug
wrench/screwdriver.
n Lead wire assembly (anti-static).
Carefully inspect all components for damage.
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
Outlet
90° Discharge
Tube
Starting..........................................................................Recoil Starter
Stopping ...........................................Slide Switch (Grounding type)
Fuel Tank Capacity................................................2.0 liters (67.6 oz)
Exhaust..........................................................Spark Arrester Muffler
Air Filtration...................................................................Dry Element
Sound Pressure Level (in accordance with ISO 22868)..................
..................................................with long nozzle Idling 82 dB (A)
................................................with short nozzle Idling 79 dB (A)
Sound Power Level (in accordance with ISO 11094).....106 dB (A)
Vibration Level (in accordance with ISO ISO22867).......................
.......................................................with long nozzle Idling 1.9 m/s
................................................ with short nozzle Idling 1.9 m/s
The terms "left", "left-hand", "LH"; "right",
"right-hand", and "RH"; "front" and "rear"
refer to directions as viewed by the opera-
tor during normal operation.
IMPORTANT!
Stop
Throttle
Switch
Lever
Throttle
Assembly
Swivel
Tube
Flexible
Tube
Racing 101 dB (A)
Racing 102 dB (A)
Racing 4.5 m/s
Racing 5.1 m/s
IMPORTANT!
2
2
2
2
5

Publicidad

Tabla de contenido
loading

Tabla de contenido