Fermax DUOX Manual De Instalador página 32

PROGRAMMING TELEPHONES (CM)
Below are the steps to follow after having chosen the programming option:
Programming the ring tone melody from the panel guard unit
3. TONE GUARD
2
3. TONE GUARD ?
2
3. TONE GUARD ?
5
3. TONE GUARD
5
Enabling the guard unit option
4. GUARD UNIT
B: 10 N: 0
OK
4. GUARD UNIT ?
B: 10 N: 0
4. GUARD UNIT ?
DISABLE
We start from the melody ring tone from the guard unit selection
on the main menu.
OK
The programmer is ready to enter the desired melody
1 2 3
4 5 6
7 8 9
0
ESC
ESC
OK
Complete programming, being able to choose any
other programming option via the arrow keys.
We start from the enabling the guard unit option from the main
menu
OK
4. GUARD UNIT ?
B: 05 N: 3
OK
4. GUARD UNIT
B: 05 N: 3
OK
4. GUARD UNIT
DISABLE
Enter the available melody number desired, from 1
to 5, depending on the model. You can also use the
arrow keys.
Delete the number entered and leave the previous
one
Enter the block number (2 digits) + Panel
Number (1 digit) of the guard unit
1 2 3
4 5 6
corresponding to this telephone.
7 8 9
0
ESC
Deletes the number entered and leave the
ESC
previous one
Being able to choose any other option via
the arrow keys.
Select DISABLE if this telephone will not be
attended by a guard unit.
The programmer is able to choose any other
option via the arrow keys.