Fermax DUOX Manual De Instalador página 42

DETECTING SUB-BLOCK PANELS (IM)
This function allows you to detect the existence of panels configured as SUB-BLOCK
ENTRANCE within the installation, along with the panel number.
For this, follow these steps indicated in the diagram:
1. DETECTOR
SUBBLOCK PANEL
1. DETECTOR
1. DETECTOR
SUBBLOCK: 00
TEST RESULT:
No panels have been
detected
TEST RESULT:
NO PANELS
ESC
Exit this function and return to the PANEL DETECTION menu
We start from the SUB-BLOCK PANEL DETECTION option
on the PANEL DETECTION menu:
OK
1 2 3
4 5 6
BLOCK: 00
7 8 9
0
OK
1 2 3
4 5 6
7 8 9
0
OK
Start testing the 10 possible panel numbers that may exist in the
PANELS
indicated block.
00 00
The two digits to the left indicate the sub-block number being
tested and the two right ones the panel number.
After having completed the scan, you can view one of these 3 results:
All 10 panels have
been detected
ALL PANELS
TEST RESULT: ?
TEST RESULT: ?
Enter the block number.
Values admitted: 00 to 09
ESC
Enter the sub-block number you wish to test.
Values admitted: 00 to 09
ESC
Only some panels have been detected.
Choose if you want to view the detected or
undetected ones.
OK
DETECTED
OK
NO DETECTED
PANEL OK:
00 07
PANEL NOK:
00 04
The panels
detected are
displayed
The panels NOT
detected are
displayed