Fermax DUOX Manual De Instalador página 38

DETECTING TELEPHONES (IM)
This function allows you to verify the existence of one or various telephones in the installation,
programmed within a range of indicated addresses. The maximum range value to test is
1000 contiguous addresses belonging to the same block.
No telephone
has been
detected
TEST RESULT:
NO TELEPHONES
Exit this function and return to the DEVICE DETECTION MENU
ESC
1. DETECTOR
TELEPHONE
OK
1. DETECTOR
BLOCK: 00
OK
1. DETECTOR
START: 0000
OK
1. DETECTOR
END: 0000
OK
TELEPHONE
000000
After having completed the scan, you can present one of these 3
Only some
telephones have
been detected
All
telephones
have been
detected
TEST RESULT:
ALL TELEPHONES
We start from the TELEPHONE DETECTOR option from
the main menu:
Enter the Block number that the telephones belong
1 2 3
4 5 6
to verify.
7 8 9
Values admitted: 00 to 09
0
ESC
1 2 3
Enter the number of the first telephone in the range.
4 5 6
7 8 9
0
ESC
Enter the address of the last telephone in the range.
1 2 3
4 5 6
(this number must be greater than the first number
7 8 9
in the range)
0
ESC
Start scanning, viewing it as it goes..
TEST RESULT: ?
DETECTED
TEST RESULT: ?
NO DETECTED
OK
TELEPHONE OK
00101
The telephones detected
are displayed
OK
TELEPHONE OK
0201
The telephones NOT
detected are displayed