Publicidad
Idiomas disponibles
Idiomas disponibles
The ultrasound basins of the series EUROSONIC
tem of industrial cleansing. In particular they are designed for the dental instrument cleaning market where high
ultrasound power is ideal for removing plaster, dentine powder, adhesive and other residues from dental instru-
ments. The EUROSONIC
Mode operation the frequency is made to oscillate continuously around the basic frequency. The waves always
return toward the transducer that is working, however, on different frequencies. This causes them to override
other frequency waves, different from the previous ones, that are, in turn reflected in different directions so that
there are never stationary waves, which increases the mechanical effectiveness of cavitation. In this way, the
propagation of waves throughout all the volume of the basin is uniform, so as to exalt cavitation to the utmost
and obtain optimum cleaning. The basins, in stainless steel, are equipped with an ultrasound transducer oper-
ating at high power that transforms the electrical energy from an electronic oscillating circuit into ultrasound
mechanical energy capable of cleaning the objects placed in its sphere of action.
Supply voltage
Number of phases
Frequency
Max consumption
Range of working conditions
Class of insulation
Fuses
Weight
Packet transducers
Working frequency
Armored steel resistors
Electronic cycle timer
Electronic temperature control
Liquid drain
Color
Switch
Automatic resetting safety thermostat, goes into action in case of insufficient or no liquids.
Absence of air intake openings to prevent possible infiltration of liquids in device
8
PART 3
DESCRIPTION
®
4D ultrasound basins operate with the new SWEEP MODE system. With Sweep
®
TECHNICAL CHARACTERISTICS
4D are the result of extensive study and research on this sys-
230 V
1
50 Hz
350 W
- Indoor use
- Altitude up to 2000 mt
- Temperature: +5 ÷ +40°C
- Max relative humidity 80% for temperatures up
to 31 °C with linear reduction to 50% at 40 °C
- Max power variation at mains: ±10%
- Category of installation (category of overvoltage) II
- Degree of pollution 1
1
2 - 2 A - 250 V
3,9 kg
3 with total power of 100 W
34÷37 kHz
1 with total power of 200 W
0 – 30 minutes
20° - 60° C
With standard tap.
Plastic tube for drainage supplied.
RAL 9002
Bipolar with protection cover
EUROSONIC 4D
®
Publicidad
Capítulos
