Operating Instructions; Operation Tips; Important - Euronda EUROSONIC 4D Manual De Instrucciones

Aparato de ultrasonidos

Idiomas disponibles

Disconnect the electricity before filling or emptying the basin.

- The basin is to be filled with lukewarm tap water, with the addition of a cleaning solution

to increase cavitation.

- The operator is responsible for ensuring that the choice of cleaning agents is adequate for

the items to be cleaned.

- Before cleaning valuable items, you are recommended to carry out a small sample test;

then you can proceed with the remaining material.

Always use baskets or beakers; otherwise suspend the items.

Never allow the items to rest on the bottom of the basin.

- The basin must be cleaned regularly and the cleaning solution changed often to increase

cleaning action efficiency.

Do not reduce ventilation.

Do not use the ultrasound basin in a dusty environment.

Dust accumulation can interfere with regular apparatus operation.

- Carry out degassing every time the liquids are replaced, run the apparatus with the solu-

tion on its own for approximately 10-15 minutes.

- Having completed the instrument cleaning cycle, rinse it with drinking water (deminer-

alised water would be better in order to avoid stain formation) and dry it thoroughly. In

the case of medical instruments, carry out the sterilisation cycle.

IMPORTANT: all instruments, after being cleaned with the ultrasound equipment,

WARNING

IMPORTANT: always wear personal protection gear.

PART 4

OPERATING INSTRUCTIONS

must be sterilized before use.

EUROSONIC 4D

Tabla de Contenido