Safety Instructions; Hazard Warnings - HOLZMANN MASCHINEN BBS350 Instrucciones De Servicio

13.4 Safety instructions

In order to avoid malfunctions, damage and health hazards when working with this machine, in
addition to the general rules for safe working, the following measures in particular must be
observed UNCONDITIONALLY:
 Choose a level, shaking-free, non-slip surface as a place to set up.
• Make sure you have enough space around the machine!
• Ensure sufficient light conditions in the workplace to avoid stroboscopic effects!
 Use only suitable tool that is free cracks and other errors (e.g. deformations).
• Remove tools from the machine before turning it on.
• Keep the area around the machine free of obstacles (e.g. dust, chips, etc.).
• Never leave the running machine unattended.
• The machine may only be operated, maintained or repaired by persons who are familiar
with it and who are aware of the dangers arising from this work.
• Make sure that unauthorized persons maintain a corresponding safety distance from the
device, and in particular keep children away from the machine.
• Wear suitable work clothes (eye protection, hearing protection, gloves duster mask, safety
shoes) as well as tight fitting work protection clothing – never loose clothes, ties,
jewellery, etc. – catchment hazard!
• Hide long hair under a hair protector.
• Do not remove splinters and chips by hand!
• Refrain from working on the machine in case of tiredness, inconcentration or under the
influence of medication, alcohol or drugs!
• Do not use the machine in areas where vapours of paints, solvents or flammable liquids
pose a potential hazard (fire or explosion hazard!).
• Do not smoke in the immediate vicinity of the machine (fire hazard)!
• Make sure the device is grounded.
 Use only suitable extension cables.
• Always disconnect the device from the power grid before cleaning, maintenance or repair
work and secure it against accidental reactivation
• Check the condition of the machine daily before and after use and do not put the machine
into operation before. During the inspection, pay close attention to the connections, safety
devices and safety signs.
 Secure the log with the clamping device instead of using the hand or help of an assistance.
This safety measure allows for the right tool operation with both hands.
• When handling rolled up saw blades, make sure that they cannot roll off uncontrollably in
order to avoid the risk of injury.

13.5 Hazard Warnings

Despite intended use, certain residual risks remain. Due to the design and construction of the
machine, hazardous situations may occur which are identified as follows in these operating
instructions:
A safety instruction designed in this way indicates an imminently hazardous
situation which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
HOLZMANN MASCHINEN GmbH
DANGER
WARNING
CAUTION
www.holzmann-maschinen.at
SAFETY
23
BBS 350