Changing The V-Belt; Maintenance Plan; Storage - HOLZMANN MASCHINEN BBS350 Instrucciones De Servicio

Aserradero de cinta
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

18.2.1 Changing the V-Belt

18.2.2 Maintenance plan

Wear of machine depends strongly on operation condition. The following intervals are valid when
using the machine within the operation limits.
Intervall
For each usage

18.3 Storage

If stored incorrectly, important components can be damaged and destroyed. Store
packaged or already unpacked parts only under the intended environmental
conditions.
HOLZMANN MASCHINEN GmbH
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
component
Band wheel bearing
Blade guide bearing
Log screws
www.holzmann-maschinen.at
Loosen screws on the motor.
Reduce belt tension with the screws.
Renew the belts.
Adjust the correct belt tension again.
activity
Check for wear and if necessary replace it
Check for wear and if necessary replace it
Grease threads
NOTICE
31
BBS 350

Publicidad

Tabla de contenido
loading

Tabla de contenido