Technical Data Ro Ag8000 - Rothenberger RO AG8000 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Protect battery packs from water and moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out and comes into contact with your eyes,
wash them with clean water and seek medical attention immediately!
Transporting li-ion battery packs: The shipping of li-ion battery packs is subject to laws relat-
ing to the carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping li-ion battery packs. If necessary, consult your freight for-
warder. Certified packaging is available from ROTHENBERGER.
2

Technical Data RO AG8000

RO AG8000 without battery, art.-no.: 1300003381
Voltage of battery pack ..................................................................... 18V
max. diameter of accessory .............................................................. 125mm / 5 in.
max. permitted thickness of clamping shank on accessory when
using "Quick"clamping nut (2) ........................................................... 6mm / ¼ in.
Roughing disc/Parting disc: max. permitted thickness of accessory .. 6mm / ¼ in.
Spindle thread .................................................................................. M14 / 25 in.
Length of the grinding spindle ........................................................... 20mm / 32 in.
No-load speed (maximum speed) ..................................................... 8000 min
Weight without battery ...................................................................... 2,4 kg / 5.3 lbs
Vibration total value (vector sum of three directions):
Vibration emission value, sanding surfaces (a
Vibration emission value, sanding with sanding pad (a
Sound pressure level (L
Acoustic power level (L
The noise level during operation can exceed 80 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60745.
24
) ................................................................ 83 dB (A) ¦ K
pA
) ................................................................ 94 dB (A) ¦ K
WA
ENGLISH
) ............................ 4,5 m/s² ¦ K
h,SG
) ............... < 2,5 m/s² ¦ K
h,DS
-1
1,5 m/s²
h,SG
1,5 m/s²
h,DS
3 dB (A)
pA
3 dB (A)
WA

Publicidad

Tabla de contenido
loading

Tabla de contenido