Descargar Imprimir esta página

Arai Helmet TX-4 Instrucciones De Uso página 22

Publicidad

English
Left chinstrap cover (D-ring side)
Right chinstrap cover (long side)
Remove the plastic chinstrap anchor cover from the steel chinstrap anchor
Couvercle gauche de la jugulaire (côté anneau en forme de D)
Couvercle droit de la jugulaire (côté long)
and slide the cover off the chinstrap.
Linke Kinnriemenabdeckung (D-Ring-Seite)
Rechte Kinnriemenabdeckung (lange Seite)
Note the right and left, inside and outside of the chinstrap covers for
replacement.
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand.
Rinse well with fresh water and wipe off with a soft cloth. Dry them in the
shade at ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
To replace the left chinstrap cover (D-ring side), ensure the female
chinstrap end snap side of the chinstrap and the leatherette side of the
chinstrap cover both face outward, slip the chinstrap cover onto the
chinstrap.
Position the plastic chinstrap anchor cover over the steel anchor and push
the cover in the anchor until the tab on the back of the cover snaps fully
home.
To replace the right chinstrap cover (long side), ensure the cap side
of the chinstrap end snap (Arai logo impressed) on the chinstrap and
the leatherette side of the chinstrap cover both face outward, slip the
chinstrap cover onto the chinstrap.
Position the plastic chinstrap anchor cover over the steel anchor and push
the cover in the anchor until the tab on the back of the cover snaps fully
home
20

Publicidad

loading

Este manual también es adecuado para:

Xd4Vx-3Vx-pro3