Publicidad
14
English
TO REMOVE/REPLACE CHEEKPADS
When first servicing the cheekpads, it is suggested that you do only one at
a time so that the other can be used as a reinstallation guide.
To remove the cheekpads, first undo chinstrap.
Gently pull the cheek pad toward the front of the helmet, then pull the back of
the cheek pad inward to release and slide it off the strap.
To take off the fabric covering for washing, peel the covering off over the rear edge
of the cheekpad assembly until all the fabric is on the face side surface. Then draw
the covering through the opening by grasping the rectangular collar and pulling.
To wash fabric coverings, put them into lukewarm water with small amount of
laundry soap or your own shampoo and wash gently by hand. Rinse well with
fresh water and wipe off with a soft cloth. Dry them in the shade at ambient
temperature.
WARNING :
Never use petrol, thinner, benzene or any other solvents.
Publicidad
Capítulos
