Denon AVR-2803 Instrucciones De Operación página 4

[] FEATURES
1. Digital Surround Sound Decoding
Featuring 32 bit high speed DSP, operating entirely
_n digital domain, surround sound from digital
sources such as DVD, LD, DTV and satellite are
faithfully re-created
2. DTS 96/24 compatibility
The AVR-2903 can be decoded with sources
recorded in DTS 96/24, a new multi-channel digital
signal format developed by Digital Theater
Systems Inc
DTS 96/24 sources can be played in the multi-
channel mode on the AVR-2803 with high sound
quality of 96 kHz/24 bits or 882 kHz/24 bits
3. DTS-ES Extended Surround and DTS Neo:6
The AVR-2809 is compatible with DTS-ES Extended
Sunound, a new multi-channel format developed by
Digital Theater Systems Inc
The AVR-2803 is also compatible w_th DTS Neo:6, a
surround mode allowing 61-channel playback ot
regular steleo sources
4. DTS }Digital Theater Systems}
DTS provides up to 51 channels of wide-range,
high fidelity surround sound, from sources such as
laser disc, DVD and specially-encoded music
discs
5. Dolby Digital
Using advanced digital processing algorithms,
Dolby Digital provides up to 5I channels of wide-
range, high fidelity surround sound Dolby Diggal
is the default digital audio delivery system for DVD
and Nor[h American DTV
6. Dolby Pro Logic 11decoder
Dolby Pro Logic 11is a new format for playing
multi-channel audio signals that offers
_mprovements over conventional Dolby Pro Logic
It can be used to decode not only sources
recorded in Dolby Surround but also regular stereo
sources into five channels {front left/right, center
and surround left/right) In addition, vanous
parameters can be set according to the type of
source and the contents, so you can adiust the
sound field with greater precision
7. Dolby Digital EX decoder system
Dolby Digital EX is a 6 1-channel surround format
proposed by Dolby Laboratories that allows users
to enioy in their homes the "DOLBY DIGITAL
SURROUND EX" audio format iointly developed
by Dolby Labolatories and Lucas Films and first
used for the movie "Star Wars Episode 1 -
Phantom Menace"
The 61 channels of sound, including surround
back channels, provide _mproved sound
positioning and expression of space
4
8. Wide screen mode for a 7.1*channel sound
even with 5,1-channel sources
DENON has developed a wide screen mode with
a new design which recreates the effects of the
multi surround speakers in movie theaters The
result is 7 f-channel sound taking full advantage of
surround back speakers, even with Dolby Pro
Logic or Dolby Digital/DTS 5 1-channel signals
9. Multi Zone Music Entertainment System
Multi Source Function:
This unit's Multi Source function lets you select
different audio sources for listening Different
sources can thus be enjoyed in the main room
(MAIN) and the subroom {ZONE 2)
simultaneously
10 Component Video Switching
In addition to composite video and "S" video
switching, the AVR-2803 provides 2 sets of
component video (Y, PB/CB, PR/C£) inputs, and one
set of component video outputs to the television,
for superior picture quality
11, Video Select Function
Allow you to watch one source (visual) while
listening to another source (audio)
12. Future Sound Format Upgrade Capability via
Eight Channel Inputs & Outputs
For future multi-channel audio format(s), the AVR-
2803 is provided with 71 channel {seven main
channels, plus one low frequency effects channel)
inputs, along with a full set of 71 channel pro-amp
outputs, controlled by the 8 channel master
volume control This assures future upgrade
possibilities for any future muki-channel sound
format
[] CONNECTIONS
• Do not plug in the AC cord until all connections
have been completed
• Be sure to connect the left and right channels
properly {left with left, right with right)¸
• Insert the plugs securely¸ Incomplete connections
will result in the generation of noise¸
• Use the AC OUTLET for audio equipment only.
Do not use them for hair driers, utc.
• Note that binding pin plug cords together with AC
cords or placing them near a power transformer
will result in generating hum or other noise
• Noise or humming may be generated if a
connected audio equipment is used independently
without turning the power of this unit on If this
happens, turn on the power of the this unit
When making connections, also refer to the operating instructions of the other components
The power to this outlet is turned on and off when the power is switched between on and standby from the
remote control unit or power switch
_ I CD payer F• Connecting a CD player jq
R L
. Connect the CD playe s analog
--
__ _ °aa°
output jacks
(ANALOG
_oo ;=21 OUTPUT) to tt sun t's CD acks
' _ using pm plug cords
O_TIC_L
Ttm table [ Connecting a Tutncable]
_MM ca_ridge)
Connect the T_rn_ab_e_ output o_d to the
LFConnecting the AC OUTLET ]
AC OUTLET
• SWLTCHED
_total oapacity 100 W)
The oower tO th_s out_et is _umed on @rid off ir_ coniur_et_r_ with the
POWER operat_n switch on the r_a_n _nit @rid when _he powe_ is
switched between on and standby from the remote control _nit
No p_wer is supplied from this o_t[e_ when this ur_]_s power is at
standby Never Gonnect equ_pmen_ whose to_ capacity _s above 100
W
NOTE:
Only use the AC OUTLET for audio equipment Never _se them for
hair dr_ers TVs or othe_ electrical appliances
] Connec_ng the DIGITAL iacks]
Use these for eo_r eotrons to audio equipment wi_h digital output R_le tu
page 13 for instr _ct_ns on setting this _erm_nal
NOTES:
• Use 75 _/ohms Gable pir co_ds fo coaxial connec_ons
• Use optical cables for o_;ca_ cormec_ions removing the cap before
cormec_lng
I _nne_'_ng _ tape deck I
_nn_ns for recording:
Connect _he tape deck's recording _nput jacks (L_NE _N or REC} _o tln_s units
tape recording (CD_]TAPE OUT) iaGks using pin plug cords
_nn_tl_ns for playback:
Connect the _ape decks p_ayback output jacks (LINE OUT or PB) _o th_s
units _ape pla'C_ack (CDRFAPE IN) lacks using p_n p_ug cords