Ensity Of A Solid " Firmly On Floor Mode - KERN AR-A01/PR-A02 Manual De Instrucciones

2.8
Density of a solid "firmly on floor mode"
This method, too, determines the density of a solid; this time without the need for any
contrivances. The thermometer monitors the temperature of the measuring liquid.
Display
0,000
FLOOR
Put solid in vessel; positioned on floor (fig. 9).
+ 24,971
FLOOR
Lift solid until it is no longer on the floor but remains completely submerged in the
measuring fluid (Fig.10).
+ 9,988
LIQUID
+ 2,496
DENSITY <->
+ 7,36
INDEX <->
0,000
FLOOR
fig. 8
AR_A01-PR_A02-BA-defsi-0620
Key
g
«T»
SET
g
« »
SET
g
« »
SET
g/cc
%
« »
g
«T»
SET
fig. 9
Step
Put the temperate reference fluid (water) in
a vessel, place it on the weighing platform
and tare (fig. 8).
Once value has stabilised, it is stored and
displayed for 2 seconds
Once value has stabilised, it is stored and
displayed for 2 seconds
Display of density of solid (as long as
within 0.1 – 25.0 g/cc range).
Display density index
(only if INDEX ON).
Tare, balance switches to display in gram
and is ready for the next density
determination.
fig. 10
19