Installation - AEG SWD81800G1 Manual De Instrucciones

INSTALLATION

POSITIONING
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the door, you must ensure that it
is made unusable to prevent
young children being trapped in-
side.
The appliance shall have the plug
accessible after installation.
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
SN
N
ST
VENTILATION REQUIREMENTS
5 cm
INSTALLING THE APPLIANCE
CAUTION!
Make sure that the mains cable
can move freely.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
min.
200 cm
2
min.
200 cm
Cli- Ambient temperature
mate
class
T +16°C to + 43°C
ELECTRICAL CONNECTION
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
The airflow behind the appliance must be
sufficient.
2
Do the following steps:
ENGLISH
17