AEG SWD81800G1 Manual De Instrucciones página 19

Do a final check to make sure that:
• All screws are tightened.
ASSEMBLY INSTRUCTIONS FOR THE COMPENSATOR LOWER
PART OF THE DOOR
Fix the covers on the screws.
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.
With the door open, loosen the two
screws situated in the lower part with-
out unscrewing them completely.
Position the steel compensator as indi-
cated in the figure and insert the upper
part under the head of the screws.
ENGLISH
19