General Safety Instructions - LaserLiner Quadrum DigiPlus Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place and
if the laser device is passed on, this document must be passed on with it.
Two-axis grade laser
– With additional red plumb laser
– Laser modes: spot, scan, rotary and hand receiver mode
– The laser modes can be set using the remote control.
– optional SensoLite 410: Laser receiver range up to 400 m radius
– optional SensoMaster 400: Laser receiver range up to 400 m radius.
With longer laser receiver unit and millimetre exact distance reading for laser level.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope of the
specifications.
Do not stare into the beam!
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes
and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions wherever possible and identify
the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
Special product features and functions
The rotary laser aligns itself automatically. It is set to the required initial position (to within
an operating angle of ± 6°) and the automatic system then performs the necessary fine
adjustment, with three electronic measurement sensors detecting the X, Y and Z axes.
Transport LOCK: The device is protected by a special motor brake during transport.
The device characterised by specific protection against dustand rain.
IP 66
Laser radiation!
Class 2 laser
< 1 mw · 635/650 nm
EN 60825-1:2014
Quadrum DigiPlus
13
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido