Switching On - Stihl MSA 160 C Manual De Instrucciones

Switching On

When delivered, the battery is charged
to a charge state of approx. 30 %.
It is advisable to charge the battery
completely before using it for the first
time.
N Before inserting the battery, remove
the battery compartment cover if
there is one; to do this, press both
safety catches at the same time –
cover is unlocked – and remove the
cover
Insert battery
N Insert battery in the battery
compartment of the machine –
battery slides into the compartment
– press gently until it clicks into
place – top of battery must be flush
with the top edge of the housing
Switching on the machine
N Assume a firm and secure stance
N Ensure that there are no other
persons within the swivel range of
the machine
MSA 160 C
N Hold the machine with both hands –
wrap hands tightly around the
handles
N
Make certain that the saw chain has
not yet been positioned for cutting
and is not touching any other
objects
N Pull hand guard towards the front
handle until it engages audibly and
the hand guard is in the position ‚
– chain brake is released
1
2
N Press trigger switch lockout (1) with
thumb
N Depress trigger switch (2) with
index finger
N Guide the machine into the wood
with the saw chain running
The motor will not run unless the hand
guard is set to ‚ and the trigger switch
lockout (1) and trigger switch (2) are
pressed at the same time.
Trigger switch
The motor speed can be controlled
using the trigger switch. The more the
trigger switch is depressed, the higher
the motor speed.
English
33