Modifications And Improvements; Serial Number - Ce Marking - IPC 1404 Manual De Instrucciones

Our company policy is based on the continuous improvement of our products. We therefore reserve the right to apply
modifications and improvements whenever we believe these are necessary, without having to upgrade the machines
previously sold.
Accident-prevention is also your responsibility.
No accident-prevention plan can be effective without the total co-operation of the person directly responsible for machine
operation.
Most accidents that occur in a company, during work or transport are caused by failure to observe the basic rules
concerning safety.
A careful and prudent user is the best guarantee against accidents and will prove to be much more effective than even
the strictest accident-prevention plan.
During work, pay attention to the persons standing in the area to clean, especially children.
Make sure the machine is fitted with a plate featuring the serial number and the CE mark. It is affixed in the position
shown in Fig.1. If the plate is not in place, contact your retailer immediately.
Unpack your machine with great care, avoiding any manoeuvre that could lead to damage.
Once you have unpacked it, make sure all parts are in a good condition. If you notice any damage, DO NOT use the
machine and contact your retailer immediately.
For reasons concerning packaging and transport, some parts and optional items may be supplied disassembled. To
assemble them, follow the instructions given in this handbook in the respective sections.
Contents of the package
N° 1 Machine
N° 1 or 2 Side brush
N° 2 Keys for starting
N° 1 Use and maintenance handbook
N° 1 Declaration of conformity
N° 1 Warranty coupon
- - - - Batteries (if purchased)
N° 1 Battery connection kit
N° 1 Battery charger (if purchased)
The DP version also features the operating instructions of the engine.
If you notice that any of the above are missing, contact your retailer immediately.
NOTE To prevent it from getting lost during transport, the keys have been put inside the envelope containing the
technical literature.
Make sure the packaging materials (bags – cartons – pallets – hooks – etc.) are put
away, out of the reach of children.
Precautions to take before starting the machine:
To facilitate transport, the side brush (or brushes) is not mounted in its expected working position.
To put it in place, read the – Preparing a new machine – section.
ENGLISH

MODIFICATIONS AND IMPROVEMENTS

SAFETY
SERIAL NUMBER – CE MARKING
UNPACKING
2