Singing Machine SML343BTBK Manual De Instrucciones página 6

Operation
Playing a CDG (Continued)
U
5
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
y
6
Connect microphone(s) as shown
on page E5, and slide the ON/OFF
switch on the microphone to the ON
position.
7
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
8
Rotate the ECHO control to add an echo
effect to your voice. Rotate towards
MAX to increase the echo effect.
W
9
AUTO VOICE CONTROL can be
X
activated by rotating the AVC
at control. The higher this control is
set to, the more the vocals on the
V
multiplex recording will be muted
when the singer starts to sing through
the microphone. When the singer
stops singing, the recorded vocals on
the multiplex recording will resume to
normal.
10
Rotate the BALANCE control
clockwise to hear the music and
recorded vocals from a multiplex
recording or counterclockwise
to hear the music only from a
multiplex recording.
Note: To use the BALANCE
control, a CD+G disc must be
used, otherwise it will operate as a
standard Balance control.
— E8 —
Operation
Playing a CDG (Continued)
ak
am al
11
SKIP: Advance or go back one track
by pressing the Skip 9/Skip :
buttons.
12
REPEAT: During playback, press the
PROGRAM/REPEAT button once
to repeatedly play the selected
song; the REPEAT indicator will
blink. Press the PROGRAM/
REPEAT button a second time to
repeatedly play the whole CD; the
REPEAT indicator will light solid.
Press it again to cancel Repeat
function, the REPEAT indicator turns
off.
13
PROGRAM: You can program up to
20 tracks on any disc for playback
in any desired order. While in the
Stop mode, press the PROGRAM/
REPEAT button; the PROGRAM
indicator will blink and "00" will
appear. Select the first track using
the Skip 9/Skip : buttons.
Press the PROGRAM/REPEAT
button again to confirm the entry.
After selecting the desired tracks
the display will show 01, 02, etc.
recognizing the tracks selected
have been programmed and the
PROGRAM indicator will illuminate
solid red. Repeat to set up to 20
tracks into memory. When done,
press the PLAY/PAUSE button to
start playback.
Note:
• Press the STOP button TWICE to stop
and clear the program.
— E9—