Singing Machine SML343BTBK Manual De Instrucciones página 8

Operation
Using a Bluetooth Device (Continued)
y
V
al
ak
5
To control your Bluetooth device
from this unit, press the PLAY/
PAUSE button to start playback.
U
Press the PLAY/PAUSE button
during playback to pause the song.
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control on this unit as well as
the volume on your Bluetooth
device.
7
Connect microphone(s) as shown
on page E5, and slide the ON/OFF
switch on the microphone to the ON
position.
8
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
X
microphones.
9
Rotate the ECHO control to add an echo
at
effect to your voice. Rotate towards MAX
W
to increase the echo effect.
10
Adjust the balance between the
speakers using the BALANCE
control.
11
SKIP: Advance or go back one
track by pressing the Skip 9/Skip
: buttons.
12
Press the power ON/STANDBY
button to turn the unit off.
— E12 —
Operation
Using the AUX IN Jack
u
v
w
y
1
Connect the unit as described
previously. Press the power ON/
STANDBY button to turn the unit on.
2
Repeatedly press the FUNCTION
button to select the AUX IN mode;
"AU" will appear on the display.
3
Connect the external unit to the
AUX IN Jack on the front of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
Notes:
• It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
• Skipping files/tracks is not possible on
this unit when using an external device.
4
x Adjust the volume using the MASTER
VOLUME control on this unit or your
external device's volume control.
5
Connect microphone(s) as shown on
page E5. Slide the ON/OFF switch on
the microphone to the ON position.
— E13—