Assembly Instructions; Assembly Sequence - GUTMANN CARTA Instrucciones De Montaje

EN

ASSEMBLY INSTRUCTIONS

7. ASSEMBLY SEQUENCE:

1. Determine positions for the following mounting holes using the dimensions given.
Missing dimensions depend on the model and must be measured on the hood. Make
sure there is a minimum distance between the hob and the lower edge of the cooker
hood.
- 2 holes (Ø10 mm) for fixing the cooker hood (top)
- 2 holes (Ø 8 mm) for fixing the cooker hood (bottom).
- 2 holes (Ø6 mm) for the upper tower suspension (tower bracket).
Option: Only for hoods with tower!
Please ensure that the cooker hood is positioned in the middle of the cooking zones.
2. Drill holes and insert corresponding dowels flush.
3. Tower angle bracket for the attachment of the upper tower.
ONLY FOR HOODS WITH TOWER !
38
Tower bracket
(option)
(Option)