Appliance Orientation Specifications; Installation; Electrical Connections; Maintenance / Cleaning - Vortice VORTICENT C Manual De Instrucciones

ENGLISH
Appliance orientation
specifications
The orientation of a radial fan delivery outlet (fig. 5) is
represented by a direction of rotation symbol (LG for
anti-clockwise and RD for clockwise, looking from the
side opposite the air intake inlet) and the angle (in
degrees) of the delivery outlet to the reference axis (a
straight line perpendicular to the base plane, passing
through the axis of rotation), measured in the
direction of rotation.
All models except C 46 are normally supplied with an
anti-clockwise LG 90° orientation. Model C 46 is
normally supplied with an anti-clockwise LG 270°
orientation. Follow the steps illustrated in fig. 4 to
change the orientation of the motor.
Fig. 6: designation of delivery outlet orientation for
radial fans: example: LG 135°.

Installation

Fig. 7÷12;
N.B.
If the appliance is installed at a height of less than 2.5
metres from the floor, it is obligatory to install
protection for moving parts, in the form of safety
grilles on the outlet or intake side (fig. 7÷8).
N.B.
If the appliance exceeds 70 dB(A), (fig.9), appropriate
noise reduction devices or Personal Protective
Equipment must be used during installation.
NOTE FOR THE INSTALLER:
To ensure electrical ground continuity, be sure to
remove the adhesive protective film (if present) or
remove any surface oxidation (if present) at one of the
flange mounting holes as shown in Fig.10a before
completing product installation.

Electrical Connections

Fig. X: single-phase appliances
Fig. Y: three-phase appliances

Maintenance / Cleaning

Fig. 15÷20
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive2012/19/EC.
This appliance bears the symbol
of the barred waste bin. This
indicates that, at the end of its
useful life, it must not be disposed
of as domestic waste, but must
be taken to a collection centre for
waste electrical and electronic
equipment, or returned to a
retailer on purchase of a replacement.
Proper differential collection, and the subsequent
recycling, processing
compatible disposal of waste equipment avoids
unnecessary damage to the environment and
possible related healthrisks, and also promotes
recycling of the materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service,
or the shop from which you purchased the appliance.
Manufacturers and
responsibilities for
environmentally compatible disposal either directly or
by participating in collective systems.
NOT FALL WITHIN
and environmentally
importers fulfil
recycling, processing
THE
their
and