Electrical Connections; Response Of Appliance When Powered Up - Vortice NORDIK AIR DESIGN 140-17 Manual De Instrucciones

ENGLISH
5. Dark Light lightening:
:
- e press once: increases/decreases the brightness level by 1 step (5 levels available); (can also be used
to select Dark Light ON)
press and hold: increases/decreases the brightness level (1 step per second while held); (can also be
- :
used to select Dark Light ON)
press once: Dark light ON/OFF
press and hold: Appliance ON/OFF
6. Mixed Light lightening:
:
press once: increases/decreases the brightness level of Room Light by 1 step, decreases/increases
- e
the brightness level of Dark Light by 1 step (5 levels available);
press and hold: increases/decreases the brightness level of Room Light continuously (1 step per
- :
second), decreases/increases the brightness level of Dark Light continuously (1 step per second);
press once: ON (brightness levels set at: Room Light 45%, Dark Light 45%) /OFF Mixed Light
press and hold: Appliance ON/OFF.

Electrical connections

Fig. 38

Response of appliance when powered up

When powered up, the appliance can be activated in two modes:
mode 1:
- motor OFF;
- light ON: the type of light (room/dark/mixed) and the relative brightness level are reset to the conditions stored
on the PCB. When the appliance is powered up, the light will always come on, regardless of the ON/OFF status
of the light stored on the PCB.
Every time the appliance is powered up, a timer program is reset and enabled. When the timer count reaches
24 hours, the light switches off automatically. The purpose of this function is to ensure that in the absence of the
user, the light will not stay on for several days when power is restored following a blackout. Any control signal
transmitted to the fan from the remote handset will disable the timer;
mode 2:
- motor OFF;
- light OFF you must use the remote control to activate the appliance
N.B.
The factory configuration is: mode 1 with light set to Room Light only, maximum brightness (90%).
To select the modes indicated above, the following procedure must be carried out within 60 seconds after the
appliance has been powered up:
mode 1: press the buttons in the following sequence (press once):
UP-UP-UP-DOWN-DOWN-DOWN-UP-UP-DOWN-DOWN-UP-DOWN-CENTRAL
mode 2: press the buttons in the following sequence (press once):
UP-DOWN-UP-UP-DOWN-DOWN-UP-UP-UP-DOWN-DOWN-DOWN-CENTRAL
Confirmation that the command has been received by the fan is indicated by 5 blinks of the Room light.
9