Pur Line CERAMIC S Serie Manual De Usuario página 18

The radiator has three different operating Modes.
1. A free operating mode
2. A daily program mode including 9 different programs from
comfort , economic
3. A weekly program mode
FREE OPERATION MODE
Press , the icon
Remark: in case of power failure, Time is reset to 00:00 and the heater will restart to the last function used
before cutting.
Adjustement of day & time
• Press once , the hours are flashing, then use the buttons
• Press again , the minutes are flashing, then use the buttons
• Press again , the date is flashing, then use the buttons
2-Tuesday, 3-Wednesday, 4- Thursday, 5-Friday, 6-Saturday, 7-Sunday.
• Press once more
Temperature setting
• Press once or
• Press again or
to 35ºC).
• After 5 seconds without action on buttons
Timer
Press for 3 seconds, the icon
Using the buttons
action on the buttons
Once the timer duration has lapsed, the radiator will automatically go into standby
Note: To exit the timer mode, press
USE OF DIFFERENT PROGRAMS
Selection of the operating mode:
Weekly program
Daily program that repeats itself every day
~
Free operating mode
Increase or decrease the temperature by using
1- Press once.
with running timer.
and frost .
: assigning a daily schedule for every day of the week.
disappears. The device is now running free
to confirm your choice.
. The temperature display flashes.
to adjust the desired temperature. (the temperature can be set over a range of 10ºC
appears. At the same time the hour display flashes and will pass at 00:00.
and choose the operating time in steps of 30 minutes. After 5 seconds without
or , the duration is validated.
3 seconds. The radiator returns to free operating mode
EN
to
. Preset temperature of 10°C.
and
and
and
or , the temperature is validated.
or .
16
combining two operating modes:
to adjust the hours,
to adjust the minutes,
to select the day: 1-Monday,
.
.