Breakdowns; Cleaning And Maintenance - Auping AVS 433 Manual De Instrucciones

5. Breakdowns

Undesirable noises (bed squeaks and
creaks)
Unwanted noises are usually caused by
moving parts touching each other.
The reason for this may be a missing part, or
parts that have not been tightened up properly
or have become loose when the bed was
moved.
Check that:
- the bed is properly horizontal;
- the bed is positioned away from the wall;
- there are no unwanted objects in the bed that
should not be there (spoons, forks, pens,
etc.).
Important!
A malfunctioning gas spring may cause the
back section to come up automatically without
remaining in a fixed position. Before consulting
your dealer, please make sure that the operating
cord and cord guide can move freely and are
not trapped between parts of the bed or mesh
base.
GB18
_01G4Q_3392 AVS 433 bw.pdf - pag.18

6. Cleaning and maintenance

Remove stains on the mesh base with a damp
cloth and gentle cleaning agent. Never use a
scouring sponge or scouring agents.
Dust the mesh base and leg frame
occasionally.
As part of Auping's commitment to caring for
the environment all metal parts have a powder
lacquer coating instead of a wet-lacquered
surface. Some of this coating material can
drop off underneath the bed during the first
weeks of use. This is harmless and can easily
be removed.
LET OP !!! Lage resolutie!
June 3, 2008