Programming User Keys - hafele DT 700c Manual De Instrucciones

8. Programming user keys

An authorised user key is needed to open the door terminal. Locking authorisation must be
allocated to this user key.
The following user keys can be programmed:
User key
Normal user key
Privileged user key
User key with
deadbolt lock function
Locking authorisa- Functionality
tion
Latchbolt lock • Opens all door terminals for which the user key has
operation (with self- locking authorisation.
locking action)
• Open door terminals then lock automatically once
the open time has elapsed.
Latchbolt lock • Functions like a normal user key
operation (with self-
• Also required by privileged persons for configuring
locking action)
the door terminal with the MDU 110 data transfer
unit.
• Also opens door terminals with activated "Do not
disturb" (DND) function when presented for a longer
period
Deadbolt lock • Functions like a normal user key
operation
• Also has a permanent open function: If the user key
(permanent open)
is held in front of the antenna for a longer period, the
open door terminals are set to "permanent open".
• Open terminals are locked again by presenting one
of the user keys that is authorised for the deadbolt
lock function again (> 2 seconds).
43