Jtrouble Shooting; Guarantee Conditions - Qlima P926 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
J
TROUBLE SHOOTING
Phenomenon
Troubleshooting
- Water full indicator lamp
blinks, and water tank is full.
UNIT DOES NOT
- Room temperature is higher
START WHEN
than the setting temperature.
PRESSING ON/OFF
(Electric heating mode)
BUTTON
- Room temperature is lower
than the setting temperature.
(Cooling mode)
- The doors or windows are not
closed.
- There are heat sources inside
the room.
Not cool enough
- Exhaust air hose is not
connected or blocked.
- Temperature setting is too
high.
- Air inlet is blocked.
- Heating protection, when the
Auto Power-Off in
temperature at the air outlet
heating mode
exceeds 70°C, the unit will
power off automatically.
- The ground is not level or not
flat enough
Noisy
- The sound comes from the
flowing of the refrigerant inside
the air conditioner
E0 Code
Room temperature sensor failed
E2 /E4 Code
Water tank full
Never attempt to disassemble or repair the device. Inexpert repairs invalidate the
guarantee and can endanger the users of the device.
K

GUARANTEE CONDITIONS

The air conditioner is supplied with a 24-month guarantee, commencing on the
date of purchase. All material and manufacturing defects will be repaired or
replaced free of charge within this period. The following rules apply:
1.
We expressly refuse all further damage claims, including claims for collateral
damage.
2.
Repairs to or replacement of components within the guarantee period will
not result in an extension of the guarantee.
3.
The guarantee is invalidated if any modifications have been made, non
genuine parts are fitted or repairs are carried out by third parties.
4.
Components subject to normal wear, such as the filter, are not covered by the
Solution
Dump the water out of the water
tank.
Reset the temperature
Reset the temperature
Make sure all the windows and doors
are closed.
Remove the heat sources if possible
Connect or clean the exhaust air
hose.
Reset the temperature
Clean the air inlet.
Restart the unit at enough lower
room temperature.
Place the unit on a flat, level ground
if possible
It is normal.
Replace room temperature sensor
(the unit can also work without
replacement.)
Please empty the water tank.
4
67

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P935

Tabla de contenido