Important; Use & Function; Hand-Held Vacuum Cleaner Accessories - Dirt Devil M 160 Manual De Instrucciones

Safety Regulations/Use & Function/Hand-held vacuum cleaner accessories
4. Do not leave appliance unattended when inflating
any items.
WARNING: Do not point air outlet openings at yourself,
bystanders or animals.
WARNING: Always unplug the product from electrical out-
let before assembling, opening or emptying the container,
or connecting/disconnecting the attachments.
CAUTION: Keep the suction intake opening free from
obstruction at all times; otherwise the motor will over-
heat and product damage may result.
CAUTION: The hand vacuum is a very powerful unit.
Before plugging cord into outlet make sure the switch
is in the OFF position. Hold the appliance firmly when
starting and in use.
CAUTION: Never exceed recommended pressure. The item
being inflated may burst and cause injury. Soft inflat-
able material items will not have existing pressure rat-
ing. Be careful not to over-inflate.
IMPORTANT: Washing filters improves vacuum perform-
ance. Make sure all filters are completely dry before
inserting back in the hand-held vacuum cleaner.
This appliance is intended for household use only and
not for commercial or industrial use.
The appliance is fitted with a motor protection thermo-
stat which switches the appliance off automatically.
Should this happen, turn the appliance OFF, allow unit
to cool, check and clean filter system, and switch back
ON.
- PLEASE KEEP THESE INSTRUCTIONS
FOR FURTHER USE -
18
3. Use & Function
To turn the hand vacuum on, press the ON switch. To
turn off, press the OFF switch.
CAUTION: The hand vacuum is a very powerful unit.
Before plugging cord into outlet make sure the switch
is in the OFF position. Hold the appliance firmly when
starting and in use.
4. Hand-held vacuum cleaner
Accessories
Fig. 3
Fig. 4/1

Hand-held vacuum cleaner accessories

Accessories contained in appliance
Two of the hand vacuum accessories are contained in
the appliance; the brush tool and the crevice tool. They
are positioned as shown in Fig. 3. For insertion of these
tools into the suction opening see Fig. 4/1.
Fig. 4/2
How to connect the connection piece
Before using, please check that "this side up BLOW" and
"this side up SUCK" are shown on the two sides of the
4
universal adaptor (part no. ). Make sure the suck side
is uppermost when using as a cleaner (Fig.4/2). This fit-
ting is only suitable for suction.
19