Defrosting By Time; Auto Menu; Starting The Auto Menu - Silvercrest SMW 900 EDS A1 Instrucciones De Uso

Defrosting by time

Take note:
Always place the food to be defrosted on dishes
suitable for use in a microwave oven. Never directly
onto the turntable 3!
In standby mode turn the control dial 0 anti
1.
clockwise until "A 13" and
display 1.
2. Press the button Weight/Kitchen Timer w
.
3. Set the desired time using the control dial 0.
4. Press button Start/Quickstart 0
the defrosting operation. The count down begins.
Take note:
To ensure optimum defrosting, it is necessary to turn
the food during the thawing process. The appliance
reminds you of the need to turn by sounding signal
tones and "turn" appears on the display 1. Open
the appliance door, turn the foodstuff and then re
close the door. Press the button Start/Quickstart 0
to continue the thawing process.
If you do not want to turn the foodstuff, just wait for
the signal tones to stop. The appliance will automati
cally continue the thawing process. We recommend
that you do turn the food. This will ensure an even
thawing.

Auto menu

For foods that are intended to be prepared in the
Auto Menu modus it is not necessary to programme
in the period of the cooking process and the power
level. It is quite sufficient to enter which type of food
is to be cooked/boiled, and its weight.
appear in the
The microwave calculates the time/operational level
for fresh foods. Frozen foods are not cooked with
the timings set by the microwave (except for automatic
programme "Pizza").
If needs be, defrost frozen foods with the defrost
to start
programme beforehand (see section "Defrosting").

Starting the Auto Menu

1.
When, by turning the control knob 0 to the left you
have reached the automatic menu mode, you can,
by then turning it to the right, make your selection
from the automatic menus in the running order A01,
A02, A03 etc.
- 88 -
Note
Turn the control dial 0 (in standby operation)
slowly to the left to call up the automatic menu
mode. In the display 1 a numer appears (e.g.
"A 02" for automatic programme 2 (sausage))
and the symbol "sausage". By turning the con
trol dial 0 select the automatic menu appro
priate for your food.
Note