Shipping And Handling; Machine Id - Nuova Simonelli MUSICA Instrucciones De Manejo

3. SHIPPING AND
HANDLING
3.1

MACHINE ID

When communicating with the manufacturer Nuova
Simonelli, always cite the machine ID number.
The machine is transported on pallets containing
several machines inside cartons strapped to the pal-
let.
Operators performing any shipping or handling
operations must:
• wear gloves, safety shoes and overalls with elasti-
cized cuffs.
Always move pallets using adequate equipment
(i.e. fork lift trucks).
CAUTION
DANGEr OF IMPACT
Or PINCHING
During handling, the operator must make certain
that there are no persons, things or objects in
the vicinity.
Slowly lift the pallet approximately 30 cm (11,8
in) off the ground and drive to the loading zone.
After having made certain that there are no
obstacles, things or persons in the way, proceed
with loading.
Once the destination has been reached, again
using adequate lifting equipment (i.e. fork lift
truck) and after having made certain that there is
nothing and no one in the unloading area, set the
pallet on the ground and move it to the storage
area; always carry the load at a height of approx-
imately 30 cm (11,8 in) from the ground.
20
CAUTION
DANGEr OF IMPACT
Or PINCHING
Before performing the following operations,
make certain that the load is in stable and will not
fall when the straps are cut.
Wearing gloves and safety shoes, the operator
must cut the straps and store the product.
During this operation, see the product technical
features for the weight of the machine being
stored and proceed as necessary.
DANGEr OF POLLUTION
Fig. 9
Once the machine has been released from the
pallet or container, do not pollute the environ-
ment with these items.
CAUTION
Fig. 10