Erreka IZAR O MAXI VIVO-D102 Manual Del Instalador página 35

1 Control board
2 Operator (MAXI with encoder)
3 Flashing light
4 Photocell
5 Fixed key command (push button or key)
6 Antenna
ELECTRICAL CABLING:
Element
A: Main power supply
B: Flashing light
C: Photocell
D: Pushbutton or key switch
E: Operator (motor + encoder)
Fig. 2 Elements of the complete installation (with MAXI operator)

The safe and correct operation of the
installation is the responsibility of the installer.
Nº threads x section
2
3x1.5mm
2
2x0.5mm
2
2x0.5mm
2
2x0.5mm
2
Duct (2x1mm + interior screened
2
duct 2x0.5mm )

The installation is activated by way of the fixed key
commands (5) (push button, key switch, proximity
key or magnetic key), or by way of radio transmitter.
DESCRIPTION OF THE PRODUCT
With MAXI operator
E155B
Maximum length
30m
20m
30m
25m
8m (maximum 25m with
2
cable 2x2.5mm )
VIVO-D102 Control board
35