Storing Your Own Sound Adjustments; To Reset To The Factory Settings - JVC KD-SX850 Manual De Instrucciones

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and
store your own adjustments in memory.
1
SCM
Within
5 seconds
2
BBE
Within
5 seconds
3
Within
5 seconds
4
SCM
5
Repeat the same procedure to store other settings.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 15.
18
3
2 2
Call up the sound mode you want to adjust.
See page 15 for details.
To adjust the bass or treble sound level
Select "BAS" or "TRE."
To turn on or off the BBE
See page 14
Adjust the bass or treble level.
See page 13 for details.
Press and hold SCM until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
II
function