Intended Use; Package Content List; General Power Tool Safety Warnings - Makita HG5030 Manual De Instrucciones

ORIGINAL INSTRUCTIONS

INTENDED USE

Your heat gun has been designed for stripping paint,
soldering pipes, shrinking PVC, welding and bending
plastic as well as general drying and thawing purposes.
WARNING:
Read this manual and
general safety Instructions carefully
before using the appliance, for your
own safety. Your power tool should
only be passed on together with these
instructions.
The tool should be connected only to
a power supply ofthe same voltage as
indicated on the nameplate, and can
only be operated on single-phase AC
supply. They are double-insulated and
can, therefore, also be used from sock-
ets without earth wire.
Hot surfaces - Burns to fingers or hands.
DESCRIPTION
Nozzle
1
On/off switch (0/1/2) HG5030 & HG6031V
2
On/off switch (0/1/2/3) HG6030
Front cover
3
Dial
4

PACKAGE CONTENT LIST

Check the appliance, the power cord, the power
Q
plug and all accessories for transportation
damages.
WARNING:
Packing materials are
not toys! Children must not play with
plastic bags! Danger of suffocation!
• 1 Heat gun
1 Set of accessories (Accessories may not be
•
necessarily be included)
• 1 Instruction manual
When parts are missing or damaged,
please contact your dealer.
GENERAL POWER TOOLSAFETY
WARNINGS
Read all safety warnings and all instructions. Failure to
follow all warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains operated (corded) power tool or battery operated
(cordless) power tool.
Work area
Keep work area clean and well lit. Cluttered and
Q
dark areas invite accidents.
Do not operate power tools in explosive atmo-
Q
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
Q
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never
Q
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
Q
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet
Q
conditions. Water entering a power tool will
increase risk of electric shock.
Do not abuse the cord. Never use the cord for
Q
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
Q
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool on a damp location
Q
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
Q
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
Use safety equipment. Always wear eye pro-
Q
tection. Safety equipment such as dust mask,
non-skid safety shoes, hand hat, or hearing
protection used whenever conditions require will
reduce personal injuries.
Avoid accidental starting.Ensure the switch is
Q
in the off position before plugging in.Carrying
power tools with your finger on the switch or plug-
ging in power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before
Q
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and
Q
balance at all times. This enables better control
of the power tool in unexpected situations.
3 English