Attaching Sanding Accessories Using Stick-Fix; Working With The Machine; Service And Maintenance - Festool LEX 2 185/7 Manual De Instrucciones

Health risk: Fitting sanding pads of incorrect
size causes excessive vibration of the ma-
chine.
Tuned to the surface being processed, the machine
can be equipped with three sanding pads of differ-
ent hardnesses.
Hard: Coarse and fine sanding on surfaces. Sand-
ing edges.
Soft: Universal for coarse and fine sanding, for flat
and convex surfaces.
Extra-soft: Fine sanding of moulded parts, arches,
radii. Do not use on edges.
Please observe all mentioned safety informa-
tions and the following rules when working:
– Always secure the workpiece in such a manner
that it cannot move while being processed.
WARNING
Risk of injury

The machine should always be disconnected
from the compresses air supply before any work
is carried out on the machine.

All maintenance and repair work which requires
the motor casing to be opened may only be car-
ried out by an authorised service centre.
8
Attaching sanding accessories using Stick-
The suitable StickFix sandpaper and StickFix sand-
ing cloth can be attached quickly and simply to the
StickFix sanding pad.

Press the self-adhesive sanding accessory onto
the sanding pad [4-1].

Working with the machine

Service and maintenance

EKAT
1
Fix
For work that generates dust, wear a dust
mask.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/ser-
vice
4 Use only original Festool spare parts!
Order No. at: www.festoolusa.com/
5
3
2
service