Operating & Maintenance Tips; Warranty Information - General DT8852 Manual Del Usuario

OPERATING & MAINTENANCE TIPS
When BAT appears at the upper right of the LCD, it's time to replace
the "9V" battery that powers the thermometer (although
measurements will remain valid for several hours after the icon first
appears).
After subjecting the thermometer to a large change in ambient
temperature, wait at least 30 minutes before making measurements to
guarantee the accuracy of readings.
Remove the battery when storing the unit or when you do not expect
to use it for an extended period of time (months rather than weeks).
Do not disassemble the thermometer or immerse it in water. Doing so
voids the 1-year limited warranty.

WARRANTY INFORMATION

General Tools & Instruments' (General's) DT8852, DT8855 or DT8856
Digital Thermocouple Thermometer is warranted to the original
purchaser to be free from defects in material and workmanship for a
period of one year. Subject to certain restrictions, General will repair or
replace this instrument if, after examination, the company determines
it to be defective in material or workmanship. The warranty period
begins on the date of purchase. You are encouraged to register your
product online. General will extend your warranty an additional
60 days if you register at www.generaltools.com/Product Registry.
This warranty does not apply to damages that General determines to
be from an attempted repair by nonauthorized personnel or misuse,
alterations, normal wear and tear, or accidental damage. The defective
unit must be returned to General Tools & Instruments or to a General-
authorized service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies
described herein is a condition of the contract for purchase of this
product. In no event shall General be liable for any incidental, special,
consequential or punitive damages, or for any cost, attorneys' fees,
expenses, or losses alleged to be a consequence of damage due to
failure of, or defect in any product including, but not limited to, any
claims for loss of profits.
Register now at www.generaltools.com/ProductRegistry to receive a
60-day extension to your warranty.
11