Korg LP-380 Manual Del Usuario página 6

Using the headphones
Use stereo headphones with a stereo 1/8" mini plug.
Since there are two headphone jacks on the lower left side
of the LP-380 keyboard, two people can enjoy the sound.
If headphones are plugged into the headphone jack, the
LP-380's speakers will not produce sound.
Use headphones at night or when you don't want disturb
others.
If your headphones feature a standard-to-mini adapter
plug, be sure to hold the adapter plug when you con-
nect or disconnect the headphones.
To protect your hearing, do not listen to loud, high-
volume sounds for extended periods of time through
headphones.
Using the music stand
The key cover serves as a convenient music stand. (Fig. 2)
Fig. 2
When placing opened music, do not apply strong pres-
sure onto the key cover.
Turning the instrument on
Press the power button to turn on the LP-380. (Fig. 3)
Fig. 3
Softer
When the instrument is turned on, the buttons on the con-
trol panel will light up.
To turn the instrument off, press the power button again.
When the instrument is turned off, all functions and
parameters, except the auto power off function return
to their factory default settings.
Auto power off function
When 30 minutes have passed without user input or
demo performance, the instrument will be automati-
cally turned off. To disable this function, turn off the
auto power off function (see page 13).
Adjust the volume
Rotate the VOLUME knob that's located next to the power
switch toward "MAX" to raise the volume level.
Rotate it left toward "MIN" to lower the level. (Fig. 3)
The VOLUME knob controls the output level of the built-in
speakers, the headphones jacks and the LINE OUT jacks.
It is always better to start with a low volume and then
increase gradually.
6
Louder
Using the LINE OUT jack
Use the LINE OUT jack, if you want to connect your LP-
380 to a mixer, stereo hi-fi, or a couple of active monitors.
When using a stereo hi-fi, connect the LINE OUTs to the
AUX or LINE inputs.
You must only connect devices with the power turned
off. Careless operation may damage the LP-380 or the
device where it's connected, or malfunctions may be
caused.
Connection cables are sold separately. You will need to
obtain the appropriate commercially-available cables
for your equipment.
Using the USB port
Connect the USB port on the LP-380 to your computer with
a USB cable to exchange MIDI and audio data.
Using USB-MIDI
see "MIDI" on page 14.
Using USB-AUDIO (when playing back audio from
your computer through the speakers of the LP-380)
1. Turn the volume all the way down on both the
LP-380 and your computer.
2. Connect your computer to the USB port on the
connector box (rear panel) with a USB cable.
When the LP-380 is connected to the computer, the
computer will recognize it as a USB audio device.
3. Select "LP-380" as the playback device for the
computer.
4. Play back sound on the computer while slowly
turning up the volume. As you raise the volume
on the LP-380, you should be able to hear the
sound coming through the speakers.
5. To adjust the volume balance, raise the volume on
your computer while playing the keyboard of the
LP-380, along with the sound played back from
the computer.
Using USB-AUDIO (when recording or playing back
notes that you play on the keyboard of the LP-380 with
your computer)
1. Turn the volume all the way down on both the
LP-380 and your computer.
2. Connect your computer to the USB port on the
connector box (rear panel) with a USB cable.
When the LP-380 is connected to the computer, the
computer will recognize it as a USB audio device.
3. Select "LP-380" as the recording device for the
computer.
4. Adjust the volume on your computer while play-
ing the keyboard of the LP-380.
5. Play back or record the sound coming from the
LP-380 with the application running on your com-
puter.
When connecting to your computer, you may hear a
loud noise depending on the settings, so adjust the
volume on your computer.