Changing The Tool - Fein ABS18 Q Manual Del Usuario

OBJ_BUCH-0000000311-001.book Page 15 Wednesday, May 9, 2018 11:55 AM

Changing the tool

Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting application tools (figure 6).
Open the keyless drill chuck.
Afterwards, insert the desired application
tool.
Tighten the keyless drill chuck.
Mounting application tools (figure 7).
Insert the application tool.
Fig. 6
Drill chuck
2.
Fig. 7
en
15
3.
1.